Other

One of the things that tires you out when you're riding on the road is vibration from rough pavement. Bontrager's Bzzzkill Harmonic Dampers go inside your handlebar ends and utilize harmonic damper technology to cancel these high-frequency vibrations so you don't feel them and can ride more comfortably. The Bzzzkills have small weights held between elastomers. When you're riding over rough roads, the elastomers delay the oscillation of the weights, canceling the vibrations so you don't feel them.

- Dispenser of chromed ferrules - 5mm

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

• Designed to keep dust and dirt out of V-Brake cable/housing systems

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Crown Race - Size: 27.0mm

- Crown Race MX - Size: MX TH 26.4mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Type: Lock washer - Size: 1" Keyed

- Routes cables underneath the bottom bracket - Will not rust or corrode

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

The Gyro G3 upper top plate is designed for use with the G3 detangler.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Product details - Use in chainstay pocket to seal sensor into frame

The Master Clamp bolt kit is a custom-designed nut and bolt set that works with most frames using integrated seat clamps and many traditional seat clamps as well. The bolt features a unique head design, that accommodates both a 5mm and 6mm allen key. This seemingly small feature makes things just a little bit simpler because we all know the feeling of grabbing the wrong size allen key wrench. This also means no matter which seat system you use, you'll only need one allen key to adjust the entire seating setup. TECH SPECS - Material: Hardened Steel - Installation: 5mm or 6mm Allen Key - Weight: 0.3oz