BMX Parts

The Gyro G3 upper top plate is designed for use with the G3 detangler.

- Sold in pairs - Allen wrench included

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair

Replacement nylon sleeve for the Cinema C4 peg. - Material: Nylon Composite - Length: 4.33" (110mm) - Diameter: 40mm - Core sold separately

A replacement dual cable stop for bikes with a dual cable gyro setup. Fits most popular frames with removable brake mounts and cable stop. Product Specifications - Type: Single Screw - Includes: Cable Stop and Screw - Weight: 0.5oz

Clean and simple, this fork cap bolt fits most modern forks on the market. CNC machined from 6061-T6 aluminum, providing strong threads and Allen key slot. This fork cap installs with a common 6mm Allen wrench. - Thread type: M24×P1.5 - Thread Length: 15mm - Weight: 0.7oz

Replacement nylon sleeve for the Mission Targa peg. Sold individually. Product Specifications - Compatibility: Fits Mission Targa Peg Only - Material: Nylon Composite - Weight: 2oz

The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly

Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

The Kink Drift pegs are made of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. When it does eventually wear out, this nylon sleeve can easily be replaced so your pegs slide like new. - Nylon sleeve only

Single screw type removable gyro tabs. Fits most BMX frames with removable headtube gyro tabs. Product Specifications - Type: Single Screw - Includes: 2 Tabs and 2 Screws - Weight: 0.5oz

No frills, affordable, durable, plain and simple. The Mission Strafe pegs are a perfect 4.5" long, and include an adapter for use with 14mm or 3/8" axles. Go get your grind on! - Sold individually - Material: Steel - Weight: 11.0-ounce

WeThePeople's Arrow 146 Grips have the perfect texture and density to give you newfound confidence while railing it on the bike. Material: VEX rubber compound Size: 146mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.

Removable Gryo Tabs - Fits all recent Kink complete bikes and aftermarket frames

Replacement high-impact plastic guard for the Cinema Beta sprocket. - Size: 25T - Material: High-impact plastic - Weight: 2.1 oz

The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.

- Press fit designed to work the hub's non-drive side collar.

The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.

The Targa peg features a super sturdy steel core covered in a durable nylon sleeve, allowing for grinds on unwaxed ledges and aluminum rails! Once you've ground through a sleeve, simply slide on a new Targa Peg replacement sleeve and get back to shredding! Sold individually. Product Specifications - Length: 4.5" (114mm) - Diameter: 40mm - Sleeve Material: Nylon Composite - Core Material: Steel - Size: 14mm (3/8" adapter Included) - Weight: 9oz (each)

Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.

Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends