Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bike Parts

"bike parts"

Shop online with us for quality bike parts from the top brands in the business.

Choose from road bike and mountain bike parts as well as tires, brake pads, seat posts, stems and more.

Receive free shipping on orders over $50.00.

Bontrager Bzzzkill Harmonic Dampers
One of the things that tires you out when you're riding on the road is vibration from rough pavement. Bontrager's Bzzzkill Harmonic Dampers go inside your handlebar ends and utilize harmonic damper technology to cancel these high-frequency vibrations so you don't feel them and can ride more comfortably. The Bzzzkills have small weights held between elastomers. When you're riding over rough roads, the elastomers delay the oscillation of the weights, canceling the vibrations so you don't feel them.
Bontrager Riser Handlebar
Bontrager's aluminum Riser Handlebar is a solid replacement for your stock bar. The 25mm rise gets you upright, great for cruising around the city or for control while descending. The 6-degree bend is ergonomically perfect for your wrists, too.
Ritchey Comp UD Carbon Fork (1 1/8-inch Aluminum Steerer, 700c)
Get the advantages of a carbon fork at a sweet value with Ritchey's Comp UD Carbon Fork. The Comp reduces road vibration thanks to the inherent qualities of carbon. Plus, this fork is light and durable, making it a fine upgrade for any road bike.
Shimano G-Type Resin Pads
- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin Compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin
Shimano XTR RD-M9120 Rear Derailleur
The RD-M9210 XTR rear derailleur is intended for use with 2x drivetrains. It is compatible with both 11- and 12-speed cassettes. - Decreased rear derailleur tension at low gear position, to prevent high chain tension - Add bumper at rear derailleur pulley cage - Bigger 13T pulley - Direct mount compatible - Cassette size: 10-45t - Total capacity: 41t
VP Components VP-VX Trail SPD-Compatible Pedals
VP's VX Trail Pedals are built for more stability and more shoe/pedal contact in an SPD-cleat compatible pedal. If you want value, durability and grip while still keeping the weight to a minimum, the VX Trails are your pedals. They boast lightweight aluminum bodies; heat-treated steel cleat jaws; forged, CNC-machined and heat-treated chromoly axles for strength and sealed bearings for long life. They have adjustable release tension, too. - 410 grams
Dia-Compe Brake Cable Ferrules
$0.39
- Dispenser of chromed ferrules - 5mm
Race Face EXI Crank Bolt Washer
$0.50
RaceFace Crank Arm Fixing Bolts - M15
Hayes HFX-Mag/-9 Sole Master Cylinder C-Clip
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
Hayes HFX-Mag/-9 Sole Master Cylinder Retaining Washer
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
Sunlite 5mm Housing Ferrules
$0.99
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Sunlite Cable End Button
$0.99
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
AheadSet Universal Preload Bolt
$1.00
- Aheadset preload adjusting bolt
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Cane Creek 10-Series Interlok Headset Spacer
$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Wolf Tooth Components 25mm B-Screw
$1.00
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Bontrager Rubber Brake Cable Boot
$1.50
• Designed to keep dust and dirt out of V-Brake cable/housing systems
KMC 415H Connecting Link
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
Dia-Compe Straddle Cable Carrier
$1.80
- Aluminum straddle cable carrier for cantilever brake
Alligator Galvanized MTB Brake Cable
$1.99
- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length
Hayes HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
Kink Senec Pedal O-Ring
$1.99
Replacement O-ring for the Senec Pedal.
Sunlite Adjusting Barrel
$1.99
- Aluminum w/lock nut - 18mm long/6mm O.D.
Sunlite Adjusting Barrel w/ Mount
$1.99
- Aluminum w/lock nut and mount - Slotted mount design
Sunlite Anchor Bolt
$1.99
- Replacement cable anchor bolt for brakes - Includes nut and washer
Sunlite Cottered Pin
$1.99
- Sunlite Cottered Pins
Sunlite Crank Dust Cap
$1.99
- Crank dust cap - Works with most three-piece crank models
Sunlite Crown Race 27mm
$1.99
- Crown Race - Size: 27.0mm
No Image
$1.99
- Crown Race MX - Size: MX TH 26.4mm
Sunlite Derailleur Bracket Bolt & Nut
$1.99
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
Sunlite Head Bearing Lower
$1.99
Replacement bearing for the lower half of YST8003 #7 headset.
Sunlite Head Bearing Top
$1.99
Replace the top bearing in your YST8300 headset with these caged ball bearings.
Sunlite Hex Head Seat Binder Bolt and Nut
$1.99
- Chrome - Sold individually
Sunlite Keyed Lock Headset Washer
$1.99
- Type: Lock washer - Size: 1" Keyed
Sunlite Nylon Cable Guide
$1.99
- Routes cables underneath the bottom bracket - Will not rust or corrode
Sunlite Stem Binder Bolt
$1.99
- w/Nut - 1-3/4-inch
Sunlite Stem Bolt
$1.99
- 8x1mm Allen head
Sunlite Sunlite Derailleur Clamp Bolt
$1.99
- Model: Replacement bolt - Compatibility: Allen, M5x16
TRP Flat Mount Rear Caliper Mounting Bolt
$1.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
Vuelta Aluminum Headset Spacers
$1.99
- machined aluminum Spacers for tuning bar and stem height, no logos
Race Face EXI Crank Bolt Puller Cap Washer
$2.00
Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt
Shimano Hoods And Road Shifter Service Parts
$2.00
- Hoods with (FD) are Flight-Deck compatible
Surly Tuggnut/Snuggnut Retaining Clip
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
Mission BMX Cable Hanger
$2.49
Traditional bolt style straddle cable hanger. Product Specifications - Size: Universal - Material: Steel - Weight: 0.6oz
Race Face Cinch Nylon Preloader Crank Assembly
$2.49
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
Odyssey Gyro G3 Detangler Upper Top Plate
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Race Face Alloy Crank Spindle Spacer
$2.50
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
SRAM 4mm Derailleur Casing
$2.50 - $99.90
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
KMC 415H-OL Chain Connector
$2.75
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
KMC Half Link Adapter
$2.75 - $2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Origin8 Rubber End Plugs
$2.79
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
Bontrager Isozone Bar End Plug
$2.99
Bar end plugs (2)
Bontrager Madone Chainstay Rubber Gasket
$2.99
Product details - Use in chainstay pocket to seal sensor into frame
Bontrager T-Post Brake Pads
$2.99
A must-have item for all your delicate department store bike repairs.
Hayes Banjo Bolt
$2.99
Replacement banjo bolt for Hayes hydraulic Brake systems.
Hayes Bleed Kit Adapter
$2.99
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Hayes Compression Fittings
$2.99 - $14.77
Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar
Kink Master Clamp Bolt Kit
$2.99
The Master Clamp bolt kit is a custom-designed nut and bolt set that works with most frames using integrated seat clamps and many traditional seat clamps as well. The bolt features a unique head design, that accommodates both a 5mm and 6mm allen key. This seemingly small feature makes things just a little bit simpler because we all know the feeling of grabbing the wrong size allen key wrench. This also means no matter which seat system you use, you'll only need one allen key to adjust the entire seating setup. TECH SPECS - Material: Hardened Steel - Installation: 5mm or 6mm Allen Key - Weight: 0.3oz
Origin8 Star Nut
$2.99
Standard replacement star nuts for threadless steerers.
Sunlite Lever Adjusting Barrel
$2.99
- For MTB levers - 7mm x 1mm - Aluminum construction
Page 1 of 94 Next page